Subcategory: Lighting - Exterior
Parttype: Tail Light Kit
With these LED taillights with E-mark suitable for 2015-2022 Mustangs in 2018 style you upgrade your Mustang not only visually, but also give it a special look at the same time. The sequential flashing function is present in these taillights in contrast to the original taillights. The 2018 facelift style taillights are available in three different colors - white, red and smoked glass. Due to the high-quality OSRAM Led modules, a long life of the lights is guaranteed and thanks to the high luminosity of the LEDs, the orange turn signals are very clearly visible in all three colors. Very easy installation, because the tail lights can be replaced directly against the original ones. These lights are only suitable for EU models, a version suitable for US models to this is already in development, but will still take a little time.
The tail lights we offer are not ''normal'' Vland tail lights. Also no Vland tail lights are used and ''opened''. The tail light housing is ordered by EPM especially for this purpose from Vland. The housing and glass is identical to Vland, but the entire electronics is different and accordingly higher quality. Here a total of 132 Osram LEDs with 3 watts each are installed (in comparison: Vland only 1 watt LEDs), which accordingly also provides a much better light output and color. Another major technical difference is the voltage with which the rear lights are operated. Vland feeds 12 volts, Exotic Pony Mods increases the voltage by means of their own control unit to a whopping 40 volts. The red and yellow colors are therefore clearly visible and distinguishable from each other.
An E-mark affixed to both tail lights (regardless of the country of origin Latvia) makes these components completely legal and registration-free throughout Europe. For data protection reasons and to avoid imitation, the test documents for this are not issued by the manufacturer. The relevant numbers are as follows:
Patent No. CN110877566A
UN approval number (only for the EPM 7-mode lamps):
E32 * 6R01 / 29 * 0242 * 00
E32 * 7R02 / 27 * 0242 * 00
E32 * 7R02 / 27 * 0242 * 00
The driver can comfortably select the ideal mode for him from a total of 7 different modes from the driver's seat:
Mode 1: Yellow cursor flashing + triple red brake light
Mode 2: Sequential yellow flashing + sequential brake light (preset mode)
Mode 3: Yellow cursor flashing + sequential brake light
Mode 4: Triple yellow cursor flashing + Triple red brake light
Mode 5: Triple red blinker + triple red brake light (US default mode)
Mode 6: Sequential yellow flashing + triple red brake light
Mode 7: Factory mode
The two modes 2 and 7 are allowed, all other modes are for show purposes only.
How to set the individual modes?
1. light switch to OFF ''0'' position
2. flip light switch in quick succession between ON and OFF (n+2) position,
n = mode number (e.g. for mode 3 you would have to switch the light on and off 3+2= 5 times)
3. switch warning lights on briefly - the rear light should go into neon mode and blink
4. switch off the hazard warning lights
5. check if the desired mode has been set
- E-mark in the glass of the tail light, so registration or acceptance of the tail lights by the TÜV is not required
- Only suitable for EU models, not compatible with a US model
- LED parking light, LED tail light, LED brake light red
- LED turn signal orange
- Connection via vehicle specific plug
- Easy mounting on original mounting points
- Bright luminosity due to high quality OSRAM LED modules
-
Top Teile und nette Funktionen
Moin zusammen, der Einbau war sehr einfach und ist alles selbsterklärend. Aber folgend der Ablauf, falls ihr euch Gedanken macht bevor ihr den Trigger pulled: - Ausbau der Heckabdeckung innerhalb des Kofferraums (Einfach per Hand machbar) - Ausbau des Subwoofers - Ausbau der Heckleuchten jeweils mit 3 Muttern befestigt - Kabelstecker lösen - Heckleuchte dann nach hinten vorsichtig wegziehen - kleinen Magneten von der Ausgebauten Heckleuchte entfernen (ist ein kleiner klipp) - Plastikabdeckung oberhalb der Heckleuchte entfernen (geht etwas schwieriger, keine angst, da bricht nichts) - Entsprechend die Plastikabdeckung und Magnet an die neuen Heckleuchten bauen - Heckleuchten einbauen in umgekehrter Reihenfolge (Muttern nicht zu fest ziehen) - Passgenauigkeit prüfen und mit den anzug der Muttern evtl. etwas spielen um die Pasgenauigkeit einzustellen - Rückleuchten testen und sich freuen! :D Ich habe die Module noch mit Kabelbinder befestigt, damit diese auch nicht auf die Idee kommen hin und her zu schwingen, wobei dies wahrscheinlich etwas übertrieben war. Die Passgenauigkeit ist gut, nicht so gut wie die Originalen, was bei den Abdeckungen oberhalb der Rückleuchten etwas auffällt. Ich feier den Standardmodus ziemlich, allein wie das Bremslicht aufleuchtet ist sehr geil. Auch wenn man es selbst selten sieht, freu ich mich über das sequenzielle Aufblinken wenn ich zum Pony gehe und auschließe. In diesem Sinne, viel Spaß beim Bestellen, Auspacken, Einbauen, Funktionstests und in der Wildnis BG Sebastian
Description expand_more
Subcategory: Lighting - Exterior
Parttype: Tail Light Kit
With these LED taillights with E-mark suitable for 2015-2022 Mustangs in 2018 style you upgrade your Mustang not only visually, but also give it a special look at the same time. The sequential flashing function is present in these taillights in contrast to the original taillights. The 2018 facelift style taillights are available in three different colors - white, red and smoked glass. Due to the high-quality OSRAM Led modules, a long life of the lights is guaranteed and thanks to the high luminosity of the LEDs, the orange turn signals are very clearly visible in all three colors. Very easy installation, because the tail lights can be replaced directly against the original ones. These lights are only suitable for EU models, a version suitable for US models to this is already in development, but will still take a little time.
The tail lights we offer are not ''normal'' Vland tail lights. Also no Vland tail lights are used and ''opened''. The tail light housing is ordered by EPM especially for this purpose from Vland. The housing and glass is identical to Vland, but the entire electronics is different and accordingly higher quality. Here a total of 132 Osram LEDs with 3 watts each are installed (in comparison: Vland only 1 watt LEDs), which accordingly also provides a much better light output and color. Another major technical difference is the voltage with which the rear lights are operated. Vland feeds 12 volts, Exotic Pony Mods increases the voltage by means of their own control unit to a whopping 40 volts. The red and yellow colors are therefore clearly visible and distinguishable from each other.
An E-mark affixed to both tail lights (regardless of the country of origin Latvia) makes these components completely legal and registration-free throughout Europe. For data protection reasons and to avoid imitation, the test documents for this are not issued by the manufacturer. The relevant numbers are as follows:
Patent No. CN110877566A
UN approval number (only for the EPM 7-mode lamps):
E32 * 6R01 / 29 * 0242 * 00
E32 * 7R02 / 27 * 0242 * 00
E32 * 7R02 / 27 * 0242 * 00
The driver can comfortably select the ideal mode for him from a total of 7 different modes from the driver's seat:
Mode 1: Yellow cursor flashing + triple red brake light
Mode 2: Sequential yellow flashing + sequential brake light (preset mode)
Mode 3: Yellow cursor flashing + sequential brake light
Mode 4: Triple yellow cursor flashing + Triple red brake light
Mode 5: Triple red blinker + triple red brake light (US default mode)
Mode 6: Sequential yellow flashing + triple red brake light
Mode 7: Factory mode
The two modes 2 and 7 are allowed, all other modes are for show purposes only.
How to set the individual modes?
1. light switch to OFF ''0'' position
2. flip light switch in quick succession between ON and OFF (n+2) position,
n = mode number (e.g. for mode 3 you would have to switch the light on and off 3+2= 5 times)
3. switch warning lights on briefly - the rear light should go into neon mode and blink
4. switch off the hazard warning lights
5. check if the desired mode has been set
- E-mark in the glass of the tail light, so registration or acceptance of the tail lights by the TÜV is not required
- Only suitable for EU models, not compatible with a US model
- LED parking light, LED tail light, LED brake light red
- LED turn signal orange
- Connection via vehicle specific plug
- Easy mounting on original mounting points
- Bright luminosity due to high quality OSRAM LED modules
Fitment Details expand_more
Downloads expand_more
Product Question expand_more
Reviews expand_more
-
Top Teile und nette Funktionen
Moin zusammen, der Einbau war sehr einfach und ist alles selbsterklärend. Aber folgend der Ablauf, falls ihr euch Gedanken macht bevor ihr den Trigger pulled: - Ausbau der Heckabdeckung innerhalb des Kofferraums (Einfach per Hand machbar) - Ausbau des Subwoofers - Ausbau der Heckleuchten jeweils mit 3 Muttern befestigt - Kabelstecker lösen - Heckleuchte dann nach hinten vorsichtig wegziehen - kleinen Magneten von der Ausgebauten Heckleuchte entfernen (ist ein kleiner klipp) - Plastikabdeckung oberhalb der Heckleuchte entfernen (geht etwas schwieriger, keine angst, da bricht nichts) - Entsprechend die Plastikabdeckung und Magnet an die neuen Heckleuchten bauen - Heckleuchten einbauen in umgekehrter Reihenfolge (Muttern nicht zu fest ziehen) - Passgenauigkeit prüfen und mit den anzug der Muttern evtl. etwas spielen um die Pasgenauigkeit einzustellen - Rückleuchten testen und sich freuen! :D Ich habe die Module noch mit Kabelbinder befestigt, damit diese auch nicht auf die Idee kommen hin und her zu schwingen, wobei dies wahrscheinlich etwas übertrieben war. Die Passgenauigkeit ist gut, nicht so gut wie die Originalen, was bei den Abdeckungen oberhalb der Rückleuchten etwas auffällt. Ich feier den Standardmodus ziemlich, allein wie das Bremslicht aufleuchtet ist sehr geil. Auch wenn man es selbst selten sieht, freu ich mich über das sequenzielle Aufblinken wenn ich zum Pony gehe und auschließe. In diesem Sinne, viel Spaß beim Bestellen, Auspacken, Einbauen, Funktionstests und in der Wildnis BG Sebastian
