35268238-65-67-6-Zyl-Umbau-auf-Servolenkung-ohne-orig-Servo-1

Part-No.:

35268238

65-67 Ford Mustang (170, 200)

Manual Steering to Power Steering Conversion Kit

1 768,99€
incl. VAT, plus Shipping Costs
Availability
1-3
Product Description
Category: Steering
Subcategory: Conversion Kits
Parttype: Manual Steering to Power Steering Conversion Kit

Borgeson Power Steering Conversion Kit for 1965-1966 200/250 Mustangs.

Upgrade your Mustang's manual steering to power steering with this quality power steering conversion kit from Borgeson! Borgeson's steering box integrates the power assist into the assembly, allowing you to eliminate the power steering control valve and slave cylinder. The stock power steering system is notorious for leaks and providing a vague and over-boosted steering feel.

This kit features a sporty 16:1 ratio re-manufactured modern integral power steering gear box that provides benefits over a traditional rack & pinion conversion, while still offering a similar steering feel and an original look. Each box is carefully assembled, adjusted and inspected to standards that surpass OEM. Does not increase the turning radius like most rack & pinion kits.

Installs easily with simple hand tools and without removing the engine. Includes all necessary components for the conversion. Features a 3 year manufacturer's warranty on the steering box.

Includes:
-Saginaw power steering pump with mounting brackets
-Power steering box
-Power steering hoses
-Steering coupler
-Replacement steering column shaft with floor mount

*Will require a 2-groove crank pulley (not included).
*Will also fit 1967 Mustangs with a 1'' sector shaft.
*Will NOT work with factory z-bar clutch linkage.
Manufacturer
Attention Information
Attention!
For 1967 models, only suitable for vehicles with a 1-inch diameter on the shaft for the lever arm. A special Z-bar is required for vehicles with a manual transmission and original Z-bar.
Contents
  • Steering Gear
  • Power Steering Pump including Bracket
  • Pulley for Power Steering Pump
  • Hoses
  • Flex Disc
  • Steering Shaft
  • Mounting Material
Product Attributes
Product Question

Do you still have an open question about this part?

Describe your request in this contact sheet and our team will assist you as soon as possible.

The fields marked with * are required.

Please note our data protection regulations.

Customer Evalutation star_outline star_outline star_outline star_outline star_outline
65-67 Ford Mustang (170, 200) Manual Steering to Power Steering Conversion Kit
Write a Review

Description expand_more

Attention Information
Attention!
For 1967 models, only suitable for vehicles with a 1-inch diameter on the shaft for the lever arm. A special Z-bar is required for vehicles with a manual transmission and original Z-bar.
Contents
  • Steering Gear
  • Power Steering Pump including Bracket
  • Pulley for Power Steering Pump
  • Hoses
  • Flex Disc
  • Steering Shaft
  • Mounting Material
Product Description
Category: Steering
Subcategory: Conversion Kits
Parttype: Manual Steering to Power Steering Conversion Kit

Borgeson Power Steering Conversion Kit for 1965-1966 200/250 Mustangs.

Upgrade your Mustang's manual steering to power steering with this quality power steering conversion kit from Borgeson! Borgeson's steering box integrates the power assist into the assembly, allowing you to eliminate the power steering control valve and slave cylinder. The stock power steering system is notorious for leaks and providing a vague and over-boosted steering feel.

This kit features a sporty 16:1 ratio re-manufactured modern integral power steering gear box that provides benefits over a traditional rack & pinion conversion, while still offering a similar steering feel and an original look. Each box is carefully assembled, adjusted and inspected to standards that surpass OEM. Does not increase the turning radius like most rack & pinion kits.

Installs easily with simple hand tools and without removing the engine. Includes all necessary components for the conversion. Features a 3 year manufacturer's warranty on the steering box.

Includes:
-Saginaw power steering pump with mounting brackets
-Power steering box
-Power steering hoses
-Steering coupler
-Replacement steering column shaft with floor mount

*Will require a 2-groove crank pulley (not included).
*Will also fit 1967 Mustangs with a 1'' sector shaft.
*Will NOT work with factory z-bar clutch linkage.
Manufacturer
Product Attributes

Fitment Details expand_more

Downloads expand_more

Product Question expand_more

Product Question

Do you still have an open question about this part?

Describe your request in this contact sheet and our team will assist you as soon as possible.

The fields marked with * are required.

Please note our data protection regulations.

Reviews expand_more

Customer Evalutation star_outline star_outline star_outline star_outline star_outline
65-67 Ford Mustang (170, 200) Manual Steering to Power Steering Conversion Kit
Write a Review